HU Heavy Duty Face Fix Joist Hanger

Product Tabs

Product Details

HU Heavy Duty Face Fix Joist Hanger

HU Joist Hanger Illustration

The HU Face Fix Joist Hanger is a heavy‑duty hanger designed for applications requiring additional strength and safety factors. It is suitable for fixing to timber or masonry.

Please check Corrosion Information if it is suitable for your application.

Material

Carbon Steel 2mm thick

Finish

Z275 Galvanised

Features & Benefits

Quick and easy installation using either nails or screws
Triangular holes (on most models) are for increased load capacity
Manufactured in heavier gauge steel for a stronger load capacity
Large seat for joists provides greater strength and support
Can be installed on solid timber header, or concrete/masonry wall
Installation to the header material can be done with Strong‑Drive^® connector nails, Strong‑Drive^® SD connector screws (for timber attachment) or Titen Turbo^™ Concrete and Masonry Screw Anchors (for concrete and masonry attachment)
(Please refer to technical sheet for installation and load requirements)

Installation

Use all specified fasteners (Refer to table below). Fasteners sold separately
Suitable for use with CCN64 connector nail gun (for timber attachment only)
Verify that the header can take the fasteners specified in the table
HU hangers must be installed by filling all round and triangular holes, with the specified fasteners
Web stiffeners are required for all I-joists used with these hangers
The hanger depth is to be at least 60% of the carried member depth to prevent rotation, unless additional lateral restraint is added to the top of the carried member
When nailing into solid sawn carrying member's end grain, the allowable load should be adjusted by a factor of 0.67
Recommended screw anchors for concrete core filled block work and solid concrete are the Titen Turbo™ 6.5mm x 70mm Hex Head - Model TNT25234H (Please refer to the technical data sheet for installation using TNT screw anchors to concrete and masonry walls)
Drill and prep the holes according to the installation instructions provided with Titen Turbo screw anchors

Model No. Table

HU Technical Data

Model No.	Markings on Hangers	Joist Size (mm)		Dimensions (mm)				Fasteners (No. – Length x Dia., mm)			Design Capacity (kN)
		Width	Height	W	H	B	Thickness	Timber Header	Concrete/ Core Filled Blockwork Header	Joist	Uplift k1 = 1.14	Download
		Width	Height	W	H	B	Thickness	Timber Header	Concrete/ Core Filled Blockwork Header	Joist	Uplift k1 = 1.14	Floor k1 = 0.69	Roof k1 = 0.77
HU140/ 45	HU1.81/ 5	45	140-205	46	137	64	2	16 - 38 x 3.75	16 - TNT6.4x70	6 - 38 x 3.75	7.16	10.94	10.94
HU170/ 45	HU7		170-255		170			16 - 38 x 3.75	16 - TNT6.4x70	8 - 38 x 3.75	8.03	10.94	10.94
HU240/ 45	HU9		240-355		237			24 - 38 x 3.75	24 - TNT6.4x70	10 - 38 x 3.75	8.03	13.8	13.8
HU285/ 45	HU11		285-420		281			30 - 38 x 3.75	30 - TNT6.4x70	10 - 38 x 3.75	8.03	13.8	13.8
HU135/ 63	HU36	63	135-190	65	133	67		8 - 38 x 3.75	8 - TNT6.4x70	4 - 38 x 3.75	5.16	6.25	6.97
HU170/ 63	HU38		170-250		167			10 - 38 x 3.75	10 - TNT6.4x70	4 - 38 x 3.75	5.16	7.34	8.2
HU225/ 63	HU310		225-335		225			14 - 38 x 3.75	14 - TNT6.4x70	6 - 38 x 3.75	7.16	10.11	10.31
HU275/ 63	HU312		275-410		275			16 - 38 x 3.75	16 - TNT6.4x70	6 - 38 x 3.75	7.16	10.31	10.31
HU120/ 90	HU46	90	120-180	90	120	67		12 - 38 x 3.75	12 - TNT6.4x70	6 - 38 x 3.75	5.16	8.46	8.46
HU155/ 90	HU48		160-235		155			14 - 38 x 3.75	14 - TNT6.4x70	6 - 38 x 3.75	5.16	9.26	9.26
HU215/ 90	HU410		215-315		213			18 - 38 x 3.75	18 - TNT6.4x70	10 - 38 x 3.75	7.55	10.94	10.94
HU265/ 90	HU412		265-390		263			22 - 38 x 3.75	22 - TNT6.4x70	10 - 38 x 3.75	7.55	12.58	12.58
HU305/ 90	HU414		305-450		302			24 - 38 x 3.75	24 - TNT6.4x70	12 - 38 x 3.75	7.55	13.8	13.8

Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the Australian Capacity Factor, and applicable the k modification factors following AS1720.1 and (2) the Serviceability Capacity which is the load at 3.2mm joint slip. Design Capacity is the minimum of test data and structural joint calculation.
For Australia, the Capacity Factor (φ) is 0.85 for nails and screws for structural joints in a Category 1 application. Reduce tabulated values where other Category applications govern.
Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor (k1) where applicable. Capacities may not be increased.
Timber species for joint design is seasoned Radiata Pine, which is Australia Joint Group JD4 per AS 1720.1 Table H2.4
For maximum nailing quantity and load values, fill all round and trianglular holes.
Concrete shall have a minimum compressive strength of f'c = 18 MPa and concrete core filled blockwork/masonry shall have a minimum compressive strength of f'm =10 MPa.
Products shall be installed such that Titen Turbo screws are not exposed to the weather.
Fasteners: Nail dimensions are listed diameter by length. Titen Turbo screws are Simpson Strong-Tie concrete and masonry screws (hex-head model required).

Brochures & Catalogues

Brochures and Catalogues

Flyer - HU Heavy Duty Face Fix Joist Hanger

Technical Data & Docs

Technical Data Sheets

Technical_Data_Sheet_HU.pdf

Report Links

ESR-2552

FL10531

Warranty

CAD Library

HU_Detail_Typical_Installation_preview.jpg

Download

jpg:

HU_Detail_Typical_Installation.jpg

dxf:

HU_Detail_Typical_Installation.dxf

dwg:

HU_Detail_Typical_Installation.dwg

PDF:

HU_Detail_Typical_Installation.pdf

HU_Detail_I-Joist_Installation_preview.jpg

Download

jpg:

HU_Detail_I-Joist_Installation.jpg

dxf:

HU_Detail_I-Joist_Installation.dxf

dwg:

HU_Detail_I-Joist_Installation.dwg

PDF:

HU_Detail_I-Joist_Installation.pdf

HU_Detail_Masonry_Installation_preview.jpg

Download

jpg:

HU_Detail_Masonry_Installation.jpg

dxf:

HU_Detail_Masonry_Installation.dxf

dwg:

HU_Detail_Masonry_Installation.dwg

PDF:

HU_Detail_Masonry_Installation.pdf

HU_3D_Preview.jpg

Download

jpg:

HU_3D.jpg

RFA:

HU170-45_3d_Cad.rfa

Download Full Set (7.5 MB)

Alternative Products

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. The LUS Double Shear Joist Hanger values engineering at its finest. All hangers in the LUS series have Double-Shear Nailing.

SAE Heavy Duty Face Fix Joist Hanger

The SAE Face Fix Joist Hanger is a heavy-duty hanger designed for applications requiring additional strength.

SDE Split Joist Hanger

The SDE Split Joist Hanger is a two‑piece, width‑adjustable joist hanger that can accommodate joist widths from 60mm and 120mm. Each SDE is comprised of one left and one right piece.

Inspiration

HU_Application_01.jpg

HU_Application_02.jpg

Request a Demo

Request a Demo/Sample*

Structural Connections

Unmatched Quality from the Truss to the Foundation

With nearly 60 years of field and R&D experience, Simpson Strong-Tie^® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.

Simpson Strong-Tie^® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie^® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Structural Connectors Overview Flyer.

Timber Connectors

From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.

From straps and ties to joist hangers and much more, Simpson Strong-Tie^® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection.

Steel Frame Connectors

From fully tested and engineered connectors and clips Simpson Strong-Tie^® provides comprehensive structural solutions for cold-formed steel construction. From steel-to-steel connections to full-scale lateral solutions and curtain wall connectors, we remain committed to developing new technology that helps to advance the cold-formed steel industry.

Find out how Simpson Strong-Tie timber connectors can help you build the right way every day. Download the Cold-Fromed Steel Construction Connectors Catalogue.

HU Heavy Duty Face Fix Joist Hanger