SCN Smooth-Shank Connector Nail (Collated & Loose)

The CCN64 Collated Connector Nailer helps to ensure the correct installation of connectors through its unique design and is considerably faster than traditional hand nailing.

Simpson Strong‑Tie offers a wide variety of holdown devices designed and tested to address many applications and load demands.

The ABU Adjustable Post Base provides a high‑strength connection between the post and concrete.

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. The LUS Double Shear Joist Hanger values engineering at its finest. All hangers in the LUS series have Double-Shear Nailing.

The SAE Face Fix Joist Hanger is a heavy-duty hanger designed for applications requiring additional strength.

The SDE Split Joist Hanger is a two‑piece, width‑adjustable joist hanger that can accommodate joist widths from 60mm and 120mm. Each SDE is comprised of one left and one right piece.

The innovative design of the LSSR Slopeable & Skewable Rafter Hanger allows it to adjust for skew up to 45° and features an innovative hinged swivel seat to adjust for up to a 45° slope on site, eliminating the need for pre‑skewed/sloped or cu

The VPA Variable Pitch Connector is a versatile, field‑adjustable solution for connecting rafters to the wall top plate.

The DTC Roof Truss Clip is an angle bracket to handle light-duty jobs or projects where a structural connection is needed.

The HTC Heavy Truss Clip ensures alignment between a roof truss and non‑bearing wall when the truss or rafter is not in contact with the top plates of the wall. Designed for applications where high lateral capacity is needed.

The versatile A35 Reinforced Angle Brackets provide a way to make a straight angle of 90° connection. The A35 Angle Bracket’s exclusive bending slot allows instant, accurate field bends for two and three-way ties.

E5 Reinforced Angle Bracket is suitable for structural applications in framing and timber-frame houses for general connecting of timber at 90° angles. Typical applications include fixing trusses, studs, purlins, beams and posts.

The RR47 Ridge Rafter Connector provides a solid connection between rafter and ridge beam. The RR47 provides alignment control and correct nailing locations.

Hurricane Ties provide a positive connection between the truss/rafter and the wall of the structure to resist wind and seismic forces. These ties connect both solid-sawn and engineered timber across a wide range of applications.

The TA Staircase Angle is a heavy duty angle bracket for connecting stair treads and stringers. It makes easier to build structurally sound stairs.

The LSC Light Staircase Stinger Connector offers a versatile, concealed connection between the stair stringer and the carrying header or boundary joist while replacing costly framing.

The TP Tie Plate joins and reinforces joints with a simple, versatile solution for a wide range of connections. The TP is a nail-on tie plate, which is  designed to be used back-to-back on a piece of timber without fastener interference.

The MSTC is designed to resist tension loads in timber-to-timber applications. This diaphragm tension strap tie utilizes a staggered nail pattern to help minimize timber splitting.