SDE Split Joist Hanger

Product Tabs

Product Details

SDE

SDE-L

SDE-R

SDE Illustration

The SDE Split Joist Hanger is a two‑piece, width‑adjustable joist hanger that can accommodate joist widths from 60mm and 120mm. Each SDE is comprised of one left and one right piece. It is essential to install nails in the base of the joist hanger to ensure a solid assembly.

Please check Corrosion Information if it is suitable for your application.

Material

Carbon Steel 2mm thick

Finish

Z275 Galvanised

Features & Benefits

Manufactured in heavier gauge steel for a stronger load capacity
One joist hanger with adjustable width can handle multiple applications, simplifying purchasing
Quick and simple installation
The hangers have bolt holes for 10mm or 12mm fasteners into the face
Can be installed on solid timber header, I-Beam or concrete/masonry wall
Compatible with Strong-Drive^® SD screws

Installation

Use all specified fasteners
Verify that the beam/header can take the fasteners specified in the table
Each SDE piece must also be nailed through the holes underneath the joist
The hangers have bolt holes for 12mm fasteners into the face
The timber bolted capacity to be determined according to the relevant standards. Do not exceed the load values given in the table
The hanger depth is to be at least 60% of the carried member depth to prevent rotation, unless additional lateral restraint is added to the top of the carried member
These hangers cannot be skewed

Model No. Table

Model No.	Joist Size (mm)		Dimensions (mm)			Fasteners (No. – Length x Dia., mm)		Country	Design Capacity (kN)
	Width	Height	W	H	B	Face	Joist		Uplift	Download
										Floor	Roof
SDE340/30	60–120	140–207	30	140	84	22 – 38 x 3.75	16 – 38 x 3.75	AU	k1 = 1.14	k1 = 0.69	k1 = 0.77
									11.48	7.82	7.82
								NZ	k1 = 1.0	k1 = 0.80	k1 = 0.80
									10.80	7.36	7.36
SDE380/30		160–237	30	160	84	22 – 38 x 3.75	16 – 38 x 3.75	AU	k1 = 1.14	k1 = 0.69	k1 = 0.77
									11.48	7.82	7.82
								NZ	k1 = 1.0	k1 = 0.80	k1 = 0.80
									10.80	7.36	7.36
SDE440/30		190–282	30	190	84	28 – 38 x 3.75	20 – 38 x 3.75	AU	k1 = 1.14	k1 = 0.69	k1 = 0.77
									17.89	10.50	10.50
								NZ	k1 = 1.0	k1 = 0.80	k1 = 0.80
									13.95	9.89	9.89
Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the Australian Capacity Factor, or the NZ Strength Reduction Factor (φ), and applicable the k modification factors following AS 1720.1 and NZS 3603 and (2) the Serviceability Capacity which is the load at 3.2mm joint slip. Design Capacity is the minimum of test data and structural joint calculation. For Australia, the Capacity Factor (φ) is 0.85 for nails and screws for structural joints in a Category 1 application. Reduce tabulated values where other Category applications govern. For NZ, the Strength Reduction Factor (φ) is 0.80 for nails in lateral loading. Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor where applicable. Capacities may not be increased. Timber species for joint design is seasoned Radiata Pine, which is Australia Joint Group JD4 per AS 1720.1 Table H2.4 and New Zealand Joint Group J5 per NZS 3603 Table 4.1.

Brochures & Catalogues

Brochures and Catalogues

Flyer - SDE Split Joist Hanger

Installation Guides

SDE Installation Guides

Technical Data & Docs

Technical Data Sheets

Technical Data Sheet - SDE

Report

ETA-06-0270

Warranty

CAD Library

SDE_Detail_preview.jpg

Download

jpg:

dxf:

dwg:

PDF:

SDE_Detail_Fix-Joist-on-Concrete_preview.jpg

Download

jpg:

SDE_Detail_Fix Joist on Concrete.jpg

dxf:

SDE_Detail_Fix Joist on Concrete.dxf

dwg:

SDE_Detail_Fix Joist on Concrete.dwg

PDF:

SDE_Detail_Fix Joist on Concrete.pdf

SDE_3D_Preview.jpg

Download

jpg:

SDE_3D.jpg

RFA:

SDE380-30_3d_Cad.rfa

Download Full Set (2.36 MB)

Alternative Products

SAE Heavy Duty Face Fix Joist Hanger

The SAE Face Fix Joist Hanger is a heavy-duty hanger designed for applications requiring additional strength.

HU Heavy Duty Face Fix Joist Hanger

The HU Face Fix Joist Hanger is a heavy‑duty hanger designed for applications requiring additional strength and safety factors. It is suitable for fixing to timber or masonry.

LUS Double Shear Joist Hanger

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. The LUS Double Shear Joist Hanger values engineering at its finest. All hangers in the LUS series have Double-Shear Nailing.

Inspiration

SDE_Application_01.jpg

Request a Demo

Request a Demo/Sample*

Structural Connections

Unmatched Quality from the Truss to the Foundation

With nearly 60 years of field and R&D experience, Simpson Strong-Tie^® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.

Simpson Strong-Tie^® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie^® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Structural Connectors Overview Flyer.

Timber Connectors

From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.

From straps and ties to joist hangers and much more, Simpson Strong-Tie^® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection.

Steel Frame Connectors

From fully tested and engineered connectors and clips Simpson Strong-Tie^® provides comprehensive structural solutions for cold-formed steel construction. From steel-to-steel connections to full-scale lateral solutions and curtain wall connectors, we remain committed to developing new technology that helps to advance the cold-formed steel industry.

Find out how Simpson Strong-Tie timber connectors can help you build the right way every day. Download the Cold-Fromed Steel Construction Connectors Catalogue.

SDE Split Joist Hanger