To the top

Australia International

BFHSD Bi-Metal Screw Timber-to-Steel - Collated & Loose

The BFHSD is designed to fasten hardwood decking to steel joists without sacrificing performance. This 316 stainless steel bi‑metal screw requires no pre‑drilling, making them easier and faster to install than typical decking screws.

The DHW is made for easy installation into the hardest timber decking products. Its drill point virtually eliminates splitting without pre-drilling.

DHSD Hardwood Decking Screw

The DHSD is specially designed to penetrate the hardest timber decking products with ease. Its unique drill point virtually eliminates countersinking and splitting without pre-drilling.

Titen HD Heavy Duty Screw Anchor - Concrete & Masonry

Titen HD® Heavy Duty Screw Anchor is the original high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titen HD® demonstrates industry-leading performance.

The DWP Softwood & Hardwood Screw is a powerful fastening solution for decking and general exterior applications where extra corrosion protection is needed.

DCU_Composite Decking Screw

The DCU is designed to work in all types of composite decking without sacrificing performance.

DCSD_Decking Screw Composite-to-Steel

The DCSD is specially designed to work in composite decking to steel applications.

A35

The versatile A35 Reinforced Angle Brackets provide a way to make a straight angle of 90° connection. The A35 Angle Bracket’s exclusive bending slot allows instant, accurate field bends for two and three-way ties.

DTT

Simpson Strong‑Tie offers a wide variety of holdown devices designed and tested to address many applications and load demands. The DTT Tension Tie & Holdown is designed for lighter‑duty holdown applications on single or double studs.

LUS46

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. The LUS Double Shear Joist Hanger values engineering at its finest. All hangers in the LUS series have Double-Shear Nailing.

CPT44Z

The CPT Concealed Post Base provides a clean look to expose the natural beauty of the timber.

Reduce the potential of timber decay at the post end with a 25 mm standoff.

LSCZ

The LSC Light Staircase Stinger Connector offers a versatile, concealed connection between the stair stringer and the carrying header or boundary joist while replacing costly framing.

TA9Z-R

The TA Staircase Angle is a heavy duty angle bracket for connecting stair treads and stringers. It makes easier to build structurally sound stairs.

The DSD hardwood decking screw has been developed to install without the need to pre‑drill boards. With toughened 316 stainless steel and coarse threads, it will fasten most species of hardwood.

Trim Head Screw

The Trim Head Screw provides a clean finish because of its special head design and is available with painted heads in Black colour.

SD9 SS Connector SS Screw

The load‑rated Strong‑Drive® SD Connector SS screw (SD SS) is a Type 316 stainless steel fastener designed, tested and approved for use with certain Simpson Strong‑Tie® stainless steel connectors.

APBO-KT

The APBO-KT decorative bottle opener is a three-piece kit that installs easily with the included screws and works well with the Outdoor Accents Avant Collection

Square Driver Bits
New color-coded driver bits for easy size identification
THD12150WHMG

The Titen HD Washer Head is a high-strength screw anchor for use in cracked and uncracked concrete, as well as masonry.

Setting up a levelling post and bearers for the sub-structure of your deck can be tedious and time consuming, but not with Adjustable Bearer Support (ABS). ABS are suitable for use where decks are typically from 300mm to 600mm off the ground.

Superior to nails in holding power and pullout resistance

The SDWH19 Timber-Hex screw is ideal for structural and general purpose timber frame applications where a hex-head drive is preferred.

AJH

The Adjustable Joist Support has been designed specifically to enable decks to easily be built over concrete slabs in areas where limited ground clearance is available.

The Multi Purpose Support (MPS) has been designed as a mid-sized support. The MPS has excellent adjustability, along with the strength and versatility to be used with either bearer or joist combinations, or with joists on their own.

Patio Deck Kit

The Patio Deck Kit is designed for those areas where there is an extremely minimal step-down from the house or apartment block to your patio area.

Request a Demo/Sample*

Experience the innovation of Simpson Strong-Tie products and how we can help you build safer, stronger structures. Please fill out your details and submit the form below. We’ll be in touch to provide you a demo and/or send you samples*.

Structural Connections

 

Unmatched Quality from the Truss to the Foundation

With nearly 60 years of field and R&D experience, Simpson Strong-Tie® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.

Simpson Strong-Tie® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Structural Connectors Overview Flyer.

Timber Connectors

From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.

From straps and ties to joist hangers and much more, Simpson Strong-Tie® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection. Download the Timber Construction Connectors Catalogue (2016-2018).