To the top

Australia International

Home / Products / RR47 Ridge Rafter Connector

RR47 Ridge Rafter Connector

Product Tabs

Product Details
RR47
RR47
RR47 Illustration
RR47 Illustration

The RR47 Ridge Rafter Connector provides a solid connection between rafter and ridge beam. The RR47 provides alignment control and correct nailing locations.

Please check the Corrosion Information to see if it is suitable for your application.

Material

Carbon Steel 1.2mm thick

Finish

Z275 Galvanised 

Features & Benefits
  • Interlocking top‑flange design eliminates interference and helps ensure rafter alignment
  • For face‑mount applications, the top flange can be bent up straight and nailed off
  • Diamond holes allow for attachment to rafter prior to attachment to ridge
Installation
  • Use all specified fasteners 
  • The RR47 may be used with any rafter slope up to 30°
Model No. Table

Model No.

Dimensions

Fasteners
(No. – Length x Dia., mm)

Country

Design Capacity (kN)

W

D

Header

Rafter

Uplift

Download

Floor

Roof

RR47

47

112

4 – 38 x 3.75

4 – 38 x 3.75

AU

k1 = 1.14

k1 = 0.69

k1 = 0.77

0.34

2.16

2.16

NZ

k1 = 1.0

k1 = 0.80

k1 = 0.80

0.32

2.03

2.03
  1. Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the Australian Capacity Factor, or the NZ Strength Reduction Factor (φ), and applicable the k modification factors following AS 1720.1 and NZS 3603 and (2) the Serviceability Capacity which is the load at 3.2mm joint slip. Design Capacity is the minimum of test data and structural joint calculation.
  2. For Australia, the Capacity Factor (φ) is 0.85 for nails and screws for structural joints in a Category 1 application. Reduce tabulated values where other Category applications govern. For NZ, the Strength Reduction Factor (φ) is 0.80 for nails in lateral loading.
  3. Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor where applicable. Capacities may not be increased.
  4. Timber species for joint design is seasoned Radiata Pine, which is Australia Joint Group JD4 per AS 1720.1 Table H2.4 and New Zealand Joint Group J5 per NZS 3603 Table 4.1.
 
Brochures & Catalogues

Brochures and Catalogues

PDF icon Flyer - RR47 Ridge Rafter Connector
Technical Data & Docs

Technical Data Sheets

PDF icon Technical Data Sheet - RR47

Report Links

ESR-3096
ESR-2553
FL10856

Warranty

Warranty

CAD Library

Download

jpg: 
Image icon RR47_Detail_Ridge Rafter Connection.jpg
dxf: 
Binary Data RR47_Detail_Ridge Rafter Connection.dxf
dwg: 
File RR47_Detail_Ridge Rafter Connection.dwg
PDF: 
PDF icon RR47_Detail_Ridge Rafter Connection.pdf

Download

jpg: 
Image icon RR47_3D.jpg
RFA: 
Binary Data RR_3d_Cad.rfa
Package icon Download Full Set (1004.31 KB)
Alternative Products

Alternative Products

LSSR

LSSR Slopeable & Skewable Rafter Hanger

The innovative design of the LSSR Slopeable & Skewable Rafter Hanger allows it to adjust for skew up to 45° and features an innovative hinged swivel seat to adjust for up to a 45° slope on site, eliminating the need for pre‑skewed/sloped or cu

Inspiration

Inspiration

RR47_Application_01.jpg

Request a Demo

Request a Demo/Sample*

Experience the innovation of Simpson Strong-Tie products and how we can help you build safer, stronger structures. Please fill out your details and submit the form below. We’ll be in touch to provide you a demo and/or send you samples*.

* Start typing address and select from the autocomplete.

Privacy policy

Request a Demo/Sample*

Experience the innovation of Simpson Strong-Tie products and how we can help you build safer, stronger structures. Please fill out your details and submit the form below. We’ll be in touch to provide you a demo and/or send you samples*.

* Start typing address and select from the autocomplete.

Privacy policy

Structural Connections

 

Unmatched Quality from the Truss to the Foundation

With nearly 60 years of field and R&D experience, Simpson Strong-Tie® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.

Simpson Strong-Tie® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Structural Connectors Overview Flyer.

Timber Connectors

From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.

From straps and ties to joist hangers and much more, Simpson Strong-Tie® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection. 

Steel Frame Connectors

From fully tested and engineered connectors and clips Simpson Strong-Tie® provides comprehensive structural solutions for cold-formed steel construction. From steel-to-steel connections to full-scale lateral solutions and curtain wall connectors, we remain committed to developing new technology that helps to advance the cold-formed steel industry.

Find out how Simpson Strong-Tie timber connectors can help you build the right way every day. Download the Cold-Fromed Steel Construction Connectors Catalogue.