The BFHSD is designed to fasten hardwood decking to steel joists without sacrificing performance. This 316 stainless steel bi‑metal screw requires no pre‑drilling, making them easier and faster to install than typical decking screws.
The DHW is made for easy installation into the hardest timber decking products. Its drill point virtually eliminates splitting without pre-drilling.
The DHSD is specially designed to penetrate the hardest timber decking products with ease. Its unique drill point virtually eliminates countersinking and splitting without pre-drilling.
Titen HD® Heavy Duty Screw Anchor is the original high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titen HD® demonstrates industry-leading performance.
The DWP screw is a powerful fastening solution for decking and general exterior applications where extra corrosion protection is needed.
The Strong‑Drive® SD Connector Screw is used with our connectors.
The Strong‑Drive® SDS Heavy Duty Connector Screw is a 6.4mm diameter structural wood screw ideal for various connector installations as well as timber-to-timber applications.
CNA Ring-Shank Connector Nail is tested and approved for use with Simpson Strong-Tie joist hangers, brackets, straps and nail plates.
The Strong‑Drive® SDWS is the 2nd generation structural screw, redesigned with a patented SawTooth™ Point.
The DCU is designed to work in all types of composite decking without sacrificing performance.
The DCSD is specially designed to work in composite decking to steel applications.
The versatile A35 Reinforced Angle Brackets provide a way to make a straight angle of 90° connection. The A35 Angle Bracket’s exclusive bending slot allows instant, accurate field bends for two and three-way ties.
Simpson Strong‑Tie offers a wide variety of holdown devices designed and tested to address many applications and load demands. The DTT Tension Tie & Holdown is designed for lighter‑duty holdown applications on single or double studs.
Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. The LUS Double Shear Joist Hanger values engineering at its finest. All hangers in the LUS series have Double-Shear Nailing.
The CPT Concealed Post Base provides a clean look to expose the natural beauty of the timber.
Reduce the potential of timber decay at the post end with a 25 mm standoff.
Hurricane Ties provide a positive connection between the truss/rafter and the wall of the structure to resist wind and seismic forces. These ties connect both solid-sawn and engineered timber across a wide range of applications.
The RTA Rigid Tie Connector secures two timber members to a vertical post forming a 90° corner.
The TA Staircase Angle is a heavy duty angle bracket for connecting stair treads and stringers. It makes easier to build structurally sound stairs.
The DTH Trim Head timber screw is ideal for timber-to-timber applications that require a clean and less noticeable finish.
Timber Fence Post Repair is Easy with the E-Z Mender™
The DSD hardwood decking screw has been developed to install without the need to pre‑drill boards. With toughened 316 stainless steel and coarse threads, it will fasten most species of hardwood.
Timeless beauty. Tested strength.
The Trim Head Screw provides a clean finish because of its special head design and is available with painted heads in Black colour.
The load‑rated Strong‑Drive® SD Connector SS screw (SD SS) is a Type 316 stainless steel fastener designed, tested and approved for use with certain Simpson Strong‑Tie® stainless steel connectors.
High strength carbon fibre laminates
Epoxy adhesive for structural bonding
High strength carbon fibre fabric
S&P C-Sheet 240 is a unidirectional carbon fibre fabric with high strength for structural reinforcement. Can be applied in a dry or wet process.
Ultra high strength carbon fibre fabric
S&P C-Sheet 640 is a unidirectional carbon fibre fabric with high strength and low elongation. S&P C-Sheet 640 is applied (stuck on) using the laminating Resin 55 HP.
Epoxy laminating resin
Solvent-free, transparent 2-component epoxy resin with a formulated amine hardener.
With nearly 60 years of field and R&D experience, Simpson Strong-Tie® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.
Simpson Strong-Tie® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Structural Connectors Overview Flyer.
From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.
From straps and ties to joist hangers and much more, Simpson Strong-Tie® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection. Download the Timber Construction Connectors Catalogue (2016-2018).