Fast Cure Chemical Anchor With Colour Change Technology.
Titen HD® Heavy Duty Screw Anchor is the original high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titen HD® demonstrates industry-leading performance.
SET-XP Epoxy Anchoring Adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications.
EDT22S Epoxy Adhesive Dispensing Tool
The EDT22S epoxy adhesive tool features a steel carriage and is engineered for high-volume, continuous use.
DT300 Acrylic Adhesive Dispensing Tool
The DT300 is a high-quality, standard size caulking tool for single cartridge adhesives. The DT300 features a steel carriage for ultimate durability and is engineered for continuous, high-volume use.
Hole Cleaning - Blow-out Pump
Manual blow pump ideal for cleaning dust from drilled holes prior to applying anchoring adhesive or installing mechanical anchors to ensure best results.
The P27SL strip loads work with Simpson Strong‑Tie PT-27 Powder-Actuated Tool and most other .27 calibre strip load tools. 0.27 Calibre Plastic, 10-Shot Strip Loads. Available in levels 4–6.
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, masonry and steel. The PDPA consists of a fastener with a 7.6mm Flat Head, 3.98mm shank diameter, Ballistic Point.
The PDPAWL is a hardened-steel, powder-actuated washered pin designed to fasten building components to concrete, masonry and steel.
Simpson Strong‑Tie offers a wide variety of holdown devices designed and tested to address many applications and load demands. The DTT Tension Tie & Holdown is designed for lighter‑duty holdown applications on single or double studs.
Simpson Strong‑Tie offers a wide variety of holdown devices designed and tested to address many applications and load demands.
MASA mudsill anchors provide a time‑saving alternative to cast‑in‑place anchor bolts on 45mm post-installed bottom plates.
The Strong-Rod™ Anchor Tiedown Systems (ATS) offer safe and tested continuous rod tiedown solutions for multi-story, timber-frame construction in seismic and high-wind areas.
Reliable installation. Less torque. Superior holding power.
The load‑rated Strong‑Drive® SD Connector SS screw (SD SS) is a Type 316 stainless steel fastener designed, tested and approved for use with certain Simpson Strong‑Tie® stainless steel connectors.
High strength carbon fibre laminates
Epoxy adhesive for structural bonding
S&P Adhesive-forming unit
For a dosed and roof shape application of the adhesive on the S&P CFRP-Laminates. For all types optimized adhesive required.
High strength carbon fibre fabric
S&P C-Sheet 240 is a unidirectional carbon fibre fabric with high strength for structural reinforcement. Can be applied in a dry or wet process.
Ultra high strength carbon fibre fabric
S&P C-Sheet 640 is a unidirectional carbon fibre fabric with high strength and low elongation. S&P C-Sheet 640 is applied (stuck on) using the laminating Resin 55 HP.
Epoxy laminating resin
Solvent-free, transparent 2-component epoxy resin with a formulated amine hardener.
VT-HP® is a high-performance fast cure vinylester resin-based chemical anchor developed for anchoring applications in cracked and non-cracked concrete 20MPa to 50MPa and qualified for use in seismic regions (performance categori
New color-coded driver bits for easy size identification
The Titen HD Washer Head is a high-strength screw anchor for use in cracked and uncracked concrete, as well as masonry.
Superior to nails in holding power and pullout resistance
The SDWH19 Timber-Hex screw is ideal for structural and general purpose timber frame applications where a hex-head drive is preferred.
Structural Connections
With nearly 60 years of field and R&D experience, Simpson Strong-Tie® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.
Simpson Strong-Tie® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Structural Connectors Overview Flyer.
Timber Connectors
From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.
From straps and ties to joist hangers and much more, Simpson Strong-Tie® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection.
Steel Frame Connectors
From fully tested and engineered connectors and clips Simpson Strong-Tie® provides comprehensive structural solutions for cold-formed steel construction. From steel-to-steel connections to full-scale lateral solutions and curtain wall connectors, we remain committed to developing new technology that helps to advance the cold-formed steel industry.
Find out how Simpson Strong-Tie timber connectors can help you build the right way every day. Download the Cold-Fromed Steel Construction Connectors Catalogue.
