To the top

Australia International

Product Tabs

Product Details
P27SL Powder Loads
P27SL Powder Loads

The P27SL strip loads work with Simpson Strong‑Tie PT-27 Powder-Actuated Tool and most other .27 calibre strip load tools. 0.27 Calibre Plastic, 10-Shot Strip Loads. Available in levels 4–6.

Powder-Actuated Fastening Safety Principles

Powder-Actuated Fastening Safety Principles Before operating any Simpson Strong-Tie Anchor Systems® gas or powder-actuated tool, you must thoroughly read and understand the Operators Manual so that you fully understand the safety guidelines of the tool. You must be trained by an authorized instructor regarding the operation of the tool. Simpson Strong-Tie highly recommends that you read and fully understand the safety guidelines of the tool you use. You must then pass a test and receive a certified operator card to become a Certified Operator of Simpson Strong-Tie tools. The test and Operator's Manual are included with each tool kit and extra copies can be obtained by contacting Simpson Strong-Tie.

General Safety

To avoid serious injury or death:

  • ALWAYS make sure that the operator and bystanders wear safety glasses. Hearing and head protection are also recommended.
  • ALWAYS post warning signs when gas- or powder-actuated tools are in use. Signs should state "Tool in Use" and should be posted within the area where the tool is being used.
  • ALWAYS store gas-and powder-actuated tools unloaded. Tools and powder loads should be stored in a locked container out of the reach of children.
  • NEVER place any part of your body over the front muzzle of the tool even if no fastener is present. The fastener, pin or tool piston can cause serious injury or death in the event of an accidental discharge.
  • NEVER transport fasteners or other hard objects in the same pocket or container with powder loads or fuel cells. These objects may strike the energy source, or puncture the fuel cell, thereby igniting and causing serious injury or death.
  • NEVER attempt to bypass or circumvent any of the safety features on a powder- or a gas-actuated tool.
  • ALWAYS keep the tool pointed in a safe direction.
  • ALWAYS keep your finger off the trigger.
  • ALWAYS keep the tool unloaded until ready to use.
  • ALWAYS stay alert, watch what you are doing and use common sense when operating. Do not use while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating may result in serious personal injury.
  • ALWAYS maintain tool with care, and keep tool clean.

Installation Safety

To avoid serious injury or death:

  • ALWAYS hold the tool perpendicular (90°) to the fastening surface to prevent ricocheting fasteners. Use the spall guard whenever possible.
  • NEVER attempt to fasten into soft, thin, brittle or very hard materials such as drywall, light gauge steel, glass, tile or cast iron as these materials are inappropriate. Conduct a pre-punch test to determine base material adequacy.
  • NEVER attempt to fasten into soft material like wood or drywall (fastening through soft materials into an appropriate base material may be allowed if the application is appropriate).
  • NEVER attempt to fasten to a spalled, cracked or uneven surface.
  • Re-driving of pins is not recommended.
Model No. Table

Powder Loads — .27 Calibre Plastic, 10-shot strip loads

Model No.


Compatible Tools

Box Qty


.27 Cal.–Brown (Level 2)


and Others



.27 Cal.–Green (Level 3)


.27 Cal.–Yellow (Level 4)


.27 Cal.–Red (Level 5)

Brochures & Catalogues

Brochures and Catalogues

PDF icon Flyer - PT-27 Powder-Actuated Tool
Technical Data & Docs
Request a Demo

Request a Demo/Sample*

Experience the innovation of Simpson Strong-Tie products and how we can help you build safer, stronger structures. Please fill out your details and submit the form below. We’ll be in touch to provide you a demo and/or send you samples*.

Request a Demo/Sample*

Experience the innovation of Simpson Strong-Tie products and how we can help you build safer, stronger structures. Please fill out your details and submit the form below. We’ll be in touch to provide you a demo and/or send you samples*.

Structural Connections


Unmatched Quality from the Truss to the Foundation

With nearly 60 years of field and R&D experience, Simpson Strong-Tie® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.

Simpson Strong-Tie® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Structural Connectors Overview Flyer.

Timber Connectors

From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.

From straps and ties to joist hangers and much more, Simpson Strong-Tie® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection. Download the Timber Construction Connectors Catalogue (2016-2018).