VT-HP High Performance Chemical Anchor

Product Tabs

Product Details

VT-HP

VT-HP with DT300 Dispensing Tool

VT-HP^® is a high-performance fast cure vinylester resin-based chemical anchor developed for anchoring applications in cracked and non-cracked concrete 20MPa to 50MPa and qualified for use in seismic regions (performance categories C1/C2).

Material

Vinylester

Base Material

Normal and Lightweight Concrete (cracked and non-cracked)
Grout-filled and Hollow Concrete Block (when used with screen tubes)
Certain un-reinforced masonry applications

Features & Benefits

Suitable for use in cracked and non-cracked concrete M8 to M30 / rebar Ø8 to Ø32
Qualified for use in seismic performance categories C1 and C2
Styrene free, low odour for safe use in confined spaces - VOC Compliant (A+ rating)
Excellent for use in cold weather conditions or applications where fast cure is required
Can be used in dry and damp conditions, wet or flooded environments (not sea water)
Fire rated
Fits 300ml standard caulking gun or DT300 by Simpson Strong-Tie, easy to dispense

Installation

Note: Refer to product label for hole and cartridge preparation, installation and technical data.

Applications

Structural Steel
Steel Columns and Beams, Post Bases, Concrete Columns
Balcony Extensions
Post-installed rebar applications
Threaded Rod Anchoring
Facades, Safety Barriers
Fences, Gates, Industrial Garage and Warehouse applications

Approvals

CE 1404 (meets EU safety, health or environmental requirements).
ETA – 19/0419 (Threaded Rod and Rebar Concrete)
ETA – 19/0765 (Threaded Rod Masonry)
Fire Rated (R120)
WRAS Approved Material (Approved for use with Potable drinking water* approval no. 1811567)

Model No. Table

Model No.	Description	Size	Box Qty
VT-HP300GREY	Fast cure vinylester anchoring adhesive (with C1 and C2 ETA Approvals) (Includes 2 mixing nozzles — MN1)	300ml	12
DT300	Manual dispensing tool for 300ml cartridges. See product here.	—	1
MN1-RP10	Suit 300ml Epoxy Adhesives, Pack of 10. See product here.	—	10

Specifications

VT-HP Curing Schedule for Concrete and Masonry - Maximum working time and minimum curing time

Concrete Temperature	Gelling/Working Time	Minimum Curing Time in Dry Concrete	Minimum Curing Time in Wet Concrete
- 10°C to -6°C*	90 min	24 h	x2
-5°C to -1°C*	90 min	14 h	x2
0°C to +4°C*	45 min	7 h	x2
+5°C to +9°C	25 min	2 h	x2
+10°C to +19°C	15 min	80 min	x2
+20°C to +29°C	6 min	45 min	x2
+30°C to +34°C	4 min	25 min	x2
+35°C to +40°C	2 min	20 min	x2
+40°C	1,5 min	15 min	x2

*Resin temperature must be at least 15 Degree’s Celsius
*All specifications based on supplied mixer
*Full cure time is 24 hours for dry conditions
*In wet concrete the curing time must be doubled

Brochures & Catalogues

Brochures and Catalogues

Flyer - VT-HP High Performance Chemical Anchor

Technical Data & Docs

Technical Data Sheets

Technical Data Sheet - VT-HP

Report

ETA-19-0419 (Threaded Rod and Rebar Concrete)

ETA-19-0765 (Threaded Rod Masonry)

WRAS Approval #1811580

DOP-e19-0765

Fire Report (R120)

Warranty

MSDS

MSDS - VT-HP

Alternative Products

AT-HP BLUE Fast Cure Chemical Anchor

Fast Cure Chemical Anchor With Colour Change Technology.

SET-XP High-Strength Epoxy Anchoring Adhesive

SET-XP Epoxy Anchoring Adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications.

THD Titen HD Heavy Duty Screw Anchor - Concrete & Masonry

Titen HD^® Heavy Duty Screw Anchor is the original high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titen HD^® demonstrates industry-leading performance.

THDWH Titen HD Heavy Duty Screw Anchor with Washer Head

The Titen HD Washer Head is a high-strength screw anchor for use in cracked and uncracked concrete, as well as masonry.

Inspiration

VT-HP_Application.jpg

VT-HP_Application_02.jpg

VT-HP_Application_03.jpg

VT-HP_Application_04.jpg

VT-HP_Application_05.jpg

Request a Demo

Request a Demo/Sample*

Structural Connections

Unmatched Quality from the Truss to the Foundation

With nearly 60 years of field and R&D experience, Simpson Strong-Tie^® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.

Simpson Strong-Tie^® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie^® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Structural Connectors Overview Flyer.

Timber Connectors

From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.

From straps and ties to joist hangers and much more, Simpson Strong-Tie^® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection.

Steel Frame Connectors

From fully tested and engineered connectors and clips Simpson Strong-Tie^® provides comprehensive structural solutions for cold-formed steel construction. From steel-to-steel connections to full-scale lateral solutions and curtain wall connectors, we remain committed to developing new technology that helps to advance the cold-formed steel industry.

Find out how Simpson Strong-Tie timber connectors can help you build the right way every day. Download the Cold-Fromed Steel Construction Connectors Catalogue.

VT-HP High Performance Chemical Anchor